TCR technical topics
Location：Home >> TCR technical topics
TCR characteristics of wear-resistant material specification table
TCR shot high wear-resistant material elastic properties spec sheet
|
Recipe Name |
EVA-140-60 | TCR-130-60 | Method＆Conditions Test methods and conditions |
| International standard | Standard | ||
| Tensele strength tensile strength | 18↑ | 20↑ | ASTMD412 Temp:23±2℃ Speed:500mm/min |
| Elongation Elongation | 250↑ | 380↑ | ASTMD412 Temp:23±2℃ Speed:500mm/min |
| Tear strength Tear strength | 8↑ | 12↑ | ASTMD624 Temp:23±2℃ Speed:500mm/min |
| Split tear Layered Tear | 2↑ | 3.5↑ | ks-08 Temp:23±2℃ Speed:200mm/min |
| Hardness Hardness | 55～60(Skin - side) 50～55(Peel - Side) | 55～60(Skin - side) 50～55(Peel - Side) | ASTMD2240 Temp:23±2℃ Load:1kg |
| Specific Gravity Density | 0.22～0.3 | 0.38～0.45 | ks-06-01 Temp:23±2℃ |
| Shrinkage Shrink | 2↓ | 2↓ | ks-07 Temp:23±2℃ Time:40min |
| Compression set Compression distortion | 65↓ | 45↓ | ASTMK395,METHODB Temp:50±2℃ Time:6Hours |
| Din Abrasion Wear | 200↓ | 150↓ | DIN53516 Temp:23±2℃ Load:10kg |
| Slip Slip | 0.6↑ | 0.8↑ | ks-09 load:6LB*3300 Cycle,Angle 15° |
| Remark | |||
| Audit: Wang Choi | Making: Laboratory | ||